20 December 2011
Whilst the reduction to the Feed-In Tariff (FIT) rates appear to
be leaving some sectors within the industry in dismay, SFS intec
has seen a continued demand for solar technology and has developed
three bespoke, easy to install fastening systems.
Colin Yeates, Sales and Marketing Director at SFS intec, said:
"The changes due to be implemented by the Government in April will
inevitably cause many to re-evaluate the use of solar technology.
But on closer inspection, the changes to the tariffs are not a
linear 50% reduction across the board, indeed rates for larger
installations were reduced far less.
"Meanwhile Building Regulations are becoming stricter and whilst
reduced emissions are a key driver, within the commercial and
retail sector, solar panel installations can still provide
businesses with an economic option for efficient use and saving of
energy.
"It is essential however, that the solutions used are simple and
suitable for the job in order to deliver the best cost result."
SFS intec's new range of photovoltaic (PV) fastening solutions
includes the SOL-R which fastens onto metal profiled and composite
panel roofs, the SOL-F used for flat roof installation and the
AceClamp, an attachment solution for standing seam metal roofs.
The SOL-R offers ease and speed of transportation, handling and
fixing and can reduce installation time by up to two thirds when
compared with other "stair bolt" alternatives. Fixed to the
profiled roof with a high performance sealant, there is no need for
pre-drilling. The post is easily adjustable in both height and rake
conditions allowing optimum positioning of the solar panels.
Equally, the SOL-F system is installed into a pre-cored support
location through the insulation layer. It is then fixed with
purpose designed fasteners that eliminate any possibility of over
driving before the waterproofing membrane is applied. The membrane
is securely clamped around the post offering 100% water tightness
and structural security, with no additional loading of the
roof.
The aluminium AceClamp comes in two designs, the Mechanical Lock
model which clamps around aluminium standing seams and the Snaplock
model which locks onto panels with a seam dimension of <.500
inch. Both are quick and simple to install, locking into place
without piercing the roof panel. The clamp is securely tightened to
ensure that it will not loosen from vibration.
For more information please contact SFS intec on 0113 2085 500,
email uk.leeds@sfsintec.biz or
visit www.sfsintec.biz/uk.